|
|
Design methodology for the selection of basic components of linear machine tool axes
Král, Stanislav ; Dosedla, Michal (referee) ; Holub, Michal (advisor)
The aim of the thesis is based on specified parameters positioning units, which include stroke (1m, 2m, 4m), load (5kg, 50kg, 500kg), you place the position accuracy (0.04 mm) and dynamic (maximum attainable speed 1.5 m / s), proposals to build a ball screw, linear motor, a toothed belt and toothed comb. For selected variants of positioning units to design a 3D model of positioning units. The proposed variations to compare and define their advantages / disadvantages, techno-economic comparison, the limit values of individual designs, etc. The work includes a search drive in positioning units, design units with toothed belt, a toothed comb, ball screw linear actuator, a calculated message of individual proposals then 3D design options for the ball screw and linear motor including drawings and assembly drawings.
|
|
|
Modular linear axis
Chlapečka, Tomáš ; Bilík, Martin (referee) ; Pavlík, Jan (advisor)
This thesis contains a structural design of linear axis with a stroke up to 800mm and a maximum load of 800N. The thesis also deals with a modular assembly system of the linear axis based on the structural design. Linear axes can be fitted with rolled, whirled and grinded ball screws with thread pitch 5, 10, 16mm and rolled trapezoidal screws on pitch 4 and 8mm. The stroke of the linear axes can be selected in the range from 200 up to 800 mm, with a maximum load of 800N in all linear dimensions. The feed of linear axis is provided by shaped rolling guide way and four trucks. The modular system offers two servo motors with direct and indirect measuring four stepper engines with indirect measuring. The thesis also includes strength and functional calculations of principal components, graphs of the possible load on linear axis in different positions , durability of the ball screws, maximum speed and feed rate of the chosen screws, data sheet, 3D model, drawings and assembly drawings of the nodes.
|
|
|
Energetic model of linear axis with ball screw and servodrive
Sládek, Vojtěch ; Tůma, Jiří (referee) ; Huzlík, Rostislav (advisor)
The aim of the thesis was to study the Energy Models of Linear Axes with Ball Screws and Servo Drives, to analyze the individual parts of the axis with respect to losses, the methodology of calculating the losses on the electrical part and the mechanical part of the drive and creating a complex algorithm that calculates the energy consumed for the specified motion. The thesis is divided into a theoretical and practical part, where the theoretical part is divided into the treatise on the electrical part of the axis and its losses and the part that deals with the mechanical part and its losses. The calculation is divided into the basic verification algorithm and the calculation on the given example. Each calculation is calculated for both linear acceleration and S-curve acceleration. For both types of acceleration, the result of energy and its course over time is also the waveforms of position, velocity, acceleration, angular acceleration, moments, powers, power, speed and currents over time.
|
|
|
Design of small hobby CNC milling machine with fixed table
Hanzal, Jiří ; Marek, Tomáš (referee) ; Pavlík, Jan (advisor)
The topic of this work is the design of a small model CNC milling machine with a fixed table for machining wood, plastic, or light alloys (Al, Zn, etc.). It also includes a calculation report and drawing documentation of selected nodes. The beginning of this work consists of an introduction to the issue of milling machines, their distribution and subsequent market analysis. Subsequently, the input parameters are designed on the basis of market analysis and in the last part there is a calculation report, the design of the milling machine itself and a short economic evaluation.
|
|
| |
|
|
Construction design hydraulic press brake
Stránský, Jaroslav ; Holub, Michal (referee) ; Pavlík, Jan (advisor)
This thesis is divided into several chapters. First two chapters after introduction are written as search type. In next part I devoted to detailed design of functional mechanisms of linearly moving parts of press brake. For the construction of stop mechanism I dealt with conversion types as ball screw, pinion with rack and timing belts. There is also quite thorough calculation part in ball screw and pinion with rack issue. I have also dealt with the necessary bending force and then designed hydraulic cylinders. Elaboration of machine frame with safety features is included.
|
|
|
Ball screws for the feed system with long stroke
Nováček, Milan ; Novotný, Lubomír (referee) ; Marek, Jiří (advisor)
Master´s thesis is directed for long ball screws of nut. It is here wrote their principle, essential type, parameters and current status of single used components. For this thesis is created at program Microsoft Excel methodical calculating of required parameters ball screws of nut. Another they are investigated status of affect length shaft ball screws, as mode storage, type actuator and possible damping. In last part is solved the design of supports long shaft ball screws and is here proposed conceptual process used supports.
|
|
| |
|
|
Design of a cross table for a machine tool
Bouchal, Tomáš ; Tůma, Jiří (referee) ; Blecha, Petr (advisor)
This choice topic: Design of milling machine cross table belongs at branch machine tool. Cross table is mechanical table, which moved in two axis. Cross table is used exclusively of milling machines. Next use of drilling machines, CNC machines, grinding machines. Bachelor works is divided into a search part in which contains summary cross table on the market. Practical part bachelor works in which contains computational part and designer part. Computational part cross table our help to acquire basic pamaterers for designer parts. Designers part cross table designers to help 3D modelling program Solidworks.
|
|
|
Positioning of the tilting head of a milling multi-purpose machining center with a horizontal spindle axis
Grepl, Martin ; Marek, Tomáš (referee) ; Marek, Jiří (advisor)
The thesis deals with the positioning of the tilting head of the multifunctional milling centre in three axis. The aim of the thesis is to design a multifunctional milling machine centre with a horizontal axis of the spindle in cooperation with Bc. Ľubomír Vazovan, Bc. Ján Rapčan a Bc. Tomáš Hynšt, who are working on the issues of the headstock, automatic tool change and palletization. The thesis also contains proposals of certain options and their subsequent evaluation by the multicriterial method PATTERN. The resulting construction is complemented by calculations of the main construction nodes.
|
guest ::
